How To Connect Batteries? Safely Make Series & Parallel Connection

In this article, we have made a step-by-step guide about How To Connect Batteries in Series and Parallel using very simple techniques.

There are two types of battery connections, series, and parallel. The difference between Series and parallels is when you hook up two or three batteries in series, the voltage doubles but keeps the Ah (amp hour) or cycle capacity the same.

Parallel connection is when hooking up two or more batteries to keep the same voltage, but to increase the starting power or cycle capacity.

Safety Measures Should Be Taken Before Connecting The Batteries

  • Take off metallic chains or rings, metal can be easily attacked by electricity make sure to remove your bracelet, rings, or even chains.
  • Wear a pair of material gloves.
  • Make sure to wear old clothes to avoid any damage, otherwise acid will destroy your new clothes.
  • Wear goggles.

How To Connect Batteries

Batteries can be connected in series, parallel, or series-parallel depending on your demands. You can make small to large battery banks with the help of those connections; even I have built 48V and 550Ah for my heavy-duty golf cart with the help of series-parallel connections.

Below are the step-by-step guides to making long-lasting battery connections;

How To Connect Batteries In Series?

Before starting the step-by-step guide we are going to confirm a few things, the series connection will only increase the voltages, not capacity (amp. Hours). Also, you have to connect a similar voltage battery like 2x6V, 3x12V, etc. You can connect one 6 volts and another 12 volts battery but this will potentially damage both units.

Let’s suppose I have two 12v batteries with 100Ah and I just need 24V, I don’t want increased capacity like 200Ah then I will connect them in series.

The result will be 24V and 100Ah.

Step By Step Guide To Connect Batteries In Series:

I am going to show you how to connect two same voltage in series, you can connect 4, 6, etc. just you need to follow the below steps.

  1. Locate the positive and negative terminals of both batteries, You can determine with the volt meter or from the colors on the terminals.
  2. Connect the positive terminal of 1st battery to the negative terminal of 2nd battery with a cable.
  3. Now Put the probes of the multimeter on the remaining terminals of both batteries (positive and negative). If you got 24.9V or more you have successfully connected them in series. Now you just need to connect the load with the remaining two terminals.

Advantages of a Series Connection

  • Connecting batteries in series yields higher voltage and less current. Less current means we can use thinner wires which will suffer less voltage drop.
  • If an inverter is rated at 30A and 12V, it can handle 360W, but if that same inverter at 24V X 30A can handle 740W.
  • Large power systems will benefit from running batteries in series at a higher voltage.

Disadvantages of a Series Connection

  • In a series connection, you cannot get lower voltage from the batteries until you use an inverter.
  • Either you use all the devices at a higher voltage or use a converter to lower the voltage at 12V.

How To Connect Batteries In Parallel?

In series you will get a voltage increase however in parallel you will get the amp. Hours or capacity increase, the voltage will be the same.

For e.g. I have connected two batteries of 12 V and 50Ah in parallel, as a result, I will get 12V and 100A.h

Step By Step Guide To Connect Batteries In Parallel

  1. Determine the negative and positive terminals of both batteries.
  2. Let’s take a wire and connect the negative terminal of the 1st battery to the negative of the 2nd, similarly connect the positive terminal of the 1st battery to the positive of the 2nd. You have done a parallel connection, now just check out the voltage and capacity.
  3. After getting accurate results connect the positive of the load to the positive of the 1st battery and the negative of the load to the negative of the 2nd battery.

Advantages of a Parallel Connection

  • The available runtime increases to double or triple depending on the number of batteries while maintaining the same voltage.
  • Another advantage is when one battery dies or has any problem, the remaining batteries will still provide power.

Disadvantages of a Parallel Connection

  • The system voltage will not increase.
  • The higher amp-hour draw means thicker cable installation which further drops the voltage.

How To Connect Batteries In Series-Parallel?

Before starting a step-by-step guide we have to clarify why we need a series and parallel connection. Suppose I have some high-voltage devices which need high capacity as well. Now I can’t increase both voltage and capacity with a single series or parallel connection so we need to connect two sets of serially connected batteries in parallel

For e.g. One set of the series system provides us 24V and 100Ah and the other provides similar capacity and voltage. If we connect both banks in parallel we will get 24V and 200Ah.

Step By Step Guide To Connect Batteries in Series-Parallel:

Take two sets of batteries connected in series; Make sure to check out the voltage and capacity of each.

Let’s connect the positive of the 1st bank to the positive of the 2nd bank, and again Connect the negative of the 1st to the negative 2nd.

Now connect the positive of the load to the positive end of the 1st battery and the negative of the load to the negative end of the 4th battery.

Take readings. If you got increased capacity with a similar voltage you have done it right.


Best Practices to Make The Battery Connections

  • Batteries should have the same voltage and amp. Hours, even I prefer to get all batteries from the same brand and I get pretty consistent efficiency for a long time.
  • The cable should be of good quality and have the same size and thickness, we have discussed this in detail below make sure to give it a read.

What Should Be The Size Of The Cables?

Choosing the right size of the cables for the battery bank is really important; you have to choose the correct diameter (thickness) and the length of the wire to get the desired efficiency by reducing the resistance. The following things should be considered before purchasing a cable.

  • The cable shouldn’t be too small and thin or it shouldn’t be too long and thick. Too long cables will unnecessary loss of power.
  • Make sure to select the same-sized cables for connecting batteries and load, for e.g. Select 0.25m cables for connecting the batteries and 1m for the load. You can’t connect one battery with 0.25m and the other with 0.30m it will increase the power loss, similarly, you can’t connect 1m for +Ve load and 1.5m for –Ve load.
  • Once you have linked the batteries and load with the same-sized cables you will get consistent efficiency.

Series Vs. Parallel Batteries

The main difference between the series and parallel connection is you will get higher voltage in series and higher capacity in parallel.

Both connections are readily used depending on the needs of different appliances.

Some powerful appliances need higher voltages, so we connect them in series to increase the voltages; however, we can connect our batteries in parallel to longer the discharge time.

For. eg if a 12V motor works for about 10 hours on a single 12-volt battery, we can get 18-19 hours by connecting two batteries in parallel.

Some Important Notes

  • Get the batteries from the same manufacturer with the same power rating.
  • Charge them first before the installation.
  • When you connect the second cable (positive or negative), there is a spark sometimes, don’t freak out. It is normal.
  • Batteries store a huge amount of power. They can explode if you don’t know what you are doing. Take your time and do it properly.

FAQs – Frequently Asked Questions

How many batteries can we connect in series?

It depends on the manufacturers, some manufacturers suggest connecting 4 batteries in series while others suggest connecting 6 or more, you just need to follow the instruction of the manufacturer and connect accordingly.

How many batteries can we connect in parallel?

Similarly in the parallel connection, we have to follow the manufacturer’s instructions.

Do Batteries Last Longer in Parallel or in Series?

Series connections offer higher voltage so the batteries tend to last marginally longer than parallel connected batteries. The runtime of both connections is roughly the same though.

Parallel vs Series Batteries: Which One is Better for You?

It depends on the need. For travel trailers, boats, and RVs, parallel connection is often preferred due to simple wiring and higher starting power. For large appliances where a large amount of power is required, a series connection with higher voltage is required.

josh Milan


Josh is a highly skilled electrician with specialized expertise in the field of generators. With years of experience under his belt, he has established himself as an expert in all aspects of generators, ranging from installation and maintenance to troubleshooting and repairs. Josh’s in-depth knowledge of electrical systems and his commitment to staying updated with the latest industry advancements make him a reliable and sought-after professional.

Leave a Reply

Your email address will not be published. Required fields are marked *